一、基本情况
邱敬文,1984年生,男,副教授,硕士生导师,美国达特茅斯学院联合培养博士,高温耐磨材料及其制备技术湖南省重点实验室副主任,《中国有色金属学报(中英文)》(CSCD/SCI期刊)首届青年编委,中国机械工程学会摩擦学分会第十三,十四届青工委委员,湘潭市企业科技特派专家,湘潭市助推民营经济高质量发展特聘专家,入选江苏省“双创计划”科技副总项目;主要从事粉末冶金钛合金及其复合材料,钛铝合金力学性能、表面强化和摩擦磨损行为等方面的研究。目前主持国家自然科学基金1项、湖南省自然科学基金2项,指导国家级大学生创新创业训练计划项目1项,湖南省大学生创新实验项目1项;参与国家级和省级科研课题5项。在《Intermetallics》、《Materials Science and Engineering: A》、《Material & Design》、《Wear》、《Materials Characterization》、《Journal of Materials Science》等国内外重要刊物上发表论文近30余篇。担任《Nano Letters》、《Materials Science and Engineering: A》等国际著名学术杂志审稿人。
联系方式:Jingwen.qiu@hnust.edu.cn, QQ: 157012254 (招收材料、机械类专硕和学硕;优秀者可推荐赴美国常青藤联盟大学攻读博士学位)
二、学习经历
2010/09-2014/06,中南大学 粉末冶金研究院,材料学,博士
2011/09-2013/10,Dartmouth College(常春藤联盟大学), 国家公派留学,联合培养博士
2007/09-2010/06,中南大学 粉末冶金研究院,材料学,硕士
2002/09-2006/06,中南大学 粉末冶金研究院,粉体材料科学与工程,学士
三、工作经历
2019/12-至 今, 湖南科技大学凯发旗舰厅官网,副教授,硕士生导师
2020/06-2021/07,湖南省科技厅,智力引进处,借调工作
2016/07-2019/11,湖南科技大学凯发旗舰厅官网,讲师,硕士生导师
2014/12-2016/06,湖南科技大学机电工程学院,讲师
四、研究方向
1. 高性能钛合金与钛基复合材料制备技术(增材制造与粉末冶金方向)及其表面强化方向
2. TiAl,FeAl金属间化合物力学性能和微观组织研究
3. 金属材料摩擦磨损行为研究
五、研究项目与平台建设
1. 主持国家自然科学基金青年项目: 粉末冶金钛合金表面纳米复合强化及摩擦磨损机理研究 (51604112)
2. 主持湖南省自然科学基金面上项目:****飞行器用***钛合金制备及其硅化物析出强化机制(2021JJ30262)
3. 主持湖南省自然科学基金青年项目:TiAl基金属间化合物表面纳米梯度耐磨层形成机制及其摩擦行为研究(2017JJ3089)
4. 主持2019年江苏省科学技术厅“双创计划”科技副总计划(FZ20190778)
5. 参与国家自然科学基金面上项目:Ag和La2O3晶内改性Mo-Si-B自润滑涂层的构筑及其宽温域摩擦学行为 (编号52175167)
6. 参与国家自然科学基金项目:垂直定向散热石墨鳞片/铜复合材料的宏微观结构设计与制备(51704113)
7. 参与湖南省教育厅项目:网状结构MoSi2复合材料的强韧化效应及其高温氧化行为(15A059)
8. 参与湖南省自然科学基金面上项目:基于动力学偏置连续分布T2相扩散障的原位自形成机制及阻挡特性(2018JJ2119)
六、研究成果论文
第一作者及通讯作者:
[1] J. Qiu, Z. Fu, B. Liu, Y. Liu, J. Yan, D. Pan, W. Zhang, I. Baker, Effects of niobium particles on the wear behavior of powder metallurgical γ-TiAl alloy in different environments,Wear (2019), 434–435(SCI, EI检索)
[2] Jingwen Qiu, Canxu Zhou, Bin Liu, Yong Liu, Huizhong Li, Xiaopeng Liang,Xiang Zan,Precipitation behavior of Ti-45Al-3Fe-2Mo-0.5C intermetallics after creep tests at 750℃,Materials Characterization(2019),155,109825 (SCI, EI检索)
[3] J. Qiu, Z. Fu, B. Liu, Y. Liu, J. Yan, D. Pan, W. Zhang, Wear Behavior of P/M High Nb Containing γ-TiAl Alloy in Different Environments, Metals and Materials International, (2019).25(6),1564-1573.(SCI, EI检索)
[4] 邱敬文, 许惠明, 刘涣平, 颜建辉* 等.矿用钛合金钻杆表面复合强化与摩擦性能研究, 润滑与密封, 2022, 47(11):124-134 (邀稿)CSCD
[5] D.Pan, B. Liu*, R. Xu, J. Qiu*, C.Liu, Predicting Workability of a Low-Cost Powder Metallurgical Ti–5Al–2Fe–3Mo Alloy Using Constitutive Modeling and Processing Map. Materials 2021, 14, 836. (SCI, EI检索)
[6] R. Guo, B. Liu, R. Xu, Y. Cao, J. Qiu*, F. Chen, Z. Yan, Y. Liu, Microstructure and mechanical properties of powder metallurgy high temperature titanium alloy with high Si content, Materials Science and Engineering: A, 777 (2020) 138993.(SCI, EI检索)
[7] X. Lu, J. Li, X. Chen, J. Qiu*, Y. Wang, B. Liu, Y. Liu, M. Rashad, F. Pan, Mechanical, tribological and electrochemical corrosion properties of in-situ synthesized Al2O3/TiAl composites, Intermetallics, 120 (2020) 106758.(SCI, EI检索)
[8] W.-d. Zhang, Z. Wu, Y. Liu, H. Bei, B. Liu, J. Qiu*, Plastic deformation mechanism of Ti–Nb–Ta–Zr–O alloy at cryogenic temperatures, Materials Science and Engineering: A, (2019) 138293.(SCI, EI检索)
[9] Wei-dong Zhang, Jun-ye Ren, Yong Liu, Jingwen Qiu*. Microstructure and mechanical properties of cold drawn Ti-Nb-Ta-Zr-O wires for biomedical applications, Metals and Materials International, (2019),(SCI, EI检索)
[10] Rui Zhou, Mou Li, Jingwen Qiu*, Sihui Ouyang, Di Pan, Chengshang Zhou,Yong Liu, Effect of Al and Sc on the mechanical behavior of FeCoNi multi-element alloys, Transactions of Nonferrous Metals Society of China, (2019), 29(10), 2109−2116(SCI, EI检索)
[11] Li Liangsheng, Qiu Jingwen *, Guo Wenmin, Liu Bin, Zhou Rui, Li Zheng, Liu Yong, Microstructure and mechanical property evolution during annealing of a cold-rolled metastable powder metallurgy high entropy alloy, Entropy, (2019), 21,833 (SCI, EI检索)
[12] J. W. Qiu, D. Pan, Y. Liu, I. Baker and W. D. Zhang, Effects of environment on the wear behavior of p/m Ti-47Al-2Cr-0.2Mo, Key Engineering Materials 770 ,2018, 106-115. (EI)
[13] J. Qiu,Y. Liu,F. Meng,I. Baker,P.R. Munroe,Effects of environment on dry sliding wear of powder metallurgical Ti-47Al-2Cr-2Nb-0.2 W,Intermetallics,2014,53:10-19. (SCI, EI检索)
[14] J. Qiu,I. Baker,F.E. Kennedy,Y. Liu,P.R. Munroe,The effects of stoichiometry on the dry sliding wear of FeAl,Intermetallics,2013,40(0):19-27. (SCI, EI检索)
[15] J. Qiu, Y. Liu, B. Liu, B. Wang, E. Ryba, H. Tang, Optimizing the hot-forging process parameters for connecting rods made of PM titanium alloy, Journal of Materials Science, 47 (2012) 3837-3848. (SCI, EI检索)
[16] J.W. Qiu, Y. Liu, Y.B. Liu, B. Liu, B. Wang, E. Ryba, H.P. Tang, Microstructures and mechanical properties of titanium alloy connecting rod made by powder forging process, Materials & Design, 33 (2012) 213-219. (SCI, EI检索)
[17] 邱敬文, 潘迪, 舒逸, 颜建辉, 段中元, 肖祥友. 表面机械研磨强化γ-TiAl 合金摩擦磨损行为研究[J]. 材料科学, 2018, 8(8): 878-889
[18] 邱敬文, 付正帆, 潘迪, 舒逸, 颜建辉, 段中元, 李伟华. 高熵合金颗粒增强钛合金复合材料摩擦磨损行为研究[J]. 材料科学, 2018, 8(10): 1007-1015
[19] 邱敬文,刘咏,刘延斌, 等.粉末冶金Ti-1.5Fe-2.25Mo钛合金的热变形本构方程[J].粉末冶金材料科学与工程,2010,15(5):439-444.
其他作者:
[1] L. Li, L. Wang, Z. Liang, J. He, J. Qiu, F. Pyczak, M. Song, Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys, Materials & Design, 224 (2022) 111291. Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys[J]. Materials & Design, 2022, 224: 111291. SCI, EI检索)
[2] D.M. Wang, X.L. Wu, K.Y. Gao, S.P. Wen, H. Wu, J.W. Qiu, W. Wei, H. Huang, D.J. Zhou, Z.R. Nie, Study on the microstructure and wear behavior of Mg-containing Al-12Sn-4Si alloys, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 18 (2022) 338-351.
[3] J.Yan, K Li, Y.Wang, J. Qiu. Microstructure and Mechanical Properties of WMoNbCrTi HEAs Sintered from the Powders Milled for Different Durations. JOM 71, (2019). 2489–2497(SCI, EI检索)
[4] H. Hu, Y. Guo, J. Yan, J. Qiu, Y. Wang, Dry sliding wear behavior of MoSi2-Mo5Si3-Mo5SiB2 composite at different temperatures and loads, Wear, 428-429 (2019) 237-245.(SCI, EI检索)
[5] L. Han, K. Li, C. Qian, J. Qiu, C. Zhou, Y. Liu, Wear behavior of light-weight and high strength Fe-Mn-Ni-Al matrix self-lubricating steels, Journal of Materials Science & Technology, 35 (2018) 623-630.(SCI, EI检索)
[6] J. Yan, J. Huang, K. Li, P. Zhou, Y. Wang, J. Qiu, Effect of Boron Content on Microstructure, Mechanical Properties, and Oxidation Resistance of Mo-Si-B Composites, Journal of Materials Engineering and Performance, 27 (2018) 6218-6226.(SCI, EI检索)
[7] Yan, J.; Guo, Y.; Wang, Y.; Zhou, P.; Qiu, J. A Comparison Study on Wear Behaviors of Mo and Al2O3-Mo Coatings from RT to 300 °C. Lubricants (2018), 6, 48.(EI检索)
[8] Y. Jianhui, W. Yi, Z. Peng, Q. Jingwen, W. Yueming, Microstructures and Room Temperature Mechanical Properties of Mo-12Si-8.5B-8Cr Alloy, Transactions of the Indian Institute of Metals, (2017).(SCI, EI检索)
[9] W.-d. Zhang, Y. Liu, H. Wu, X.-d. Lan, J. Qiu, T. Hu, H.-p. Tang, Room temperature creep behavior of Ti–Nb–Ta–Zr–O alloy, Materials Characterization, 118 (2016) 29-36.(SCI, EI检索)
[10] MENG F, QIU J, BAKER I, et al. The effects of annealing on the microstructure and mechanical properties of Fe28Ni18Mn33Al21 [J]. Journal of Materials Science, 2015, 50 (23): 7821-7834.(SCI, EI检索)
[11] MENG F, QIU J, BAKER I. Effect of Al content on the microstructure and mechanical behavior of two-phase FeNiMnAl alloys [J]. Journal of Materials Science, 2014, 49 (5): 1973-1983.(SCI, EI检索)
[12] MENG F, QIU J, BAKER I. The effects of chromium on the microstructure and tensile behavior of Fe30Ni20Mn35Al15 [J]. Materials Science and Engineering: A, 2013, 586 (0): 45-52.(SCI, EI检索)
[13] Liu Yanbin, Liu Yong, Wang Bin, Qiu Jingwen, Liu Bin,Tang Huiping Microstructure Evolution and Mechanical Properties of a Powder Metallurgical Titanium Alloy with Yttrium Addition[J]. Materials and Manufacturing Processes, 2010, 25(8): 735-739 (SCI, EI检索)
[14] 王斌, 刘咏, 刘延斌, 汤慧萍, 邱敬文, 王玉林 稀土La对粉末冶金钛合金组织和力学性能的影响[J].粉末冶金材料科学与工程,2011,16(1):136-142.(EI检索)
七、国家发明专利
[1] 邱敬文; 刘春轩; 谢屹; 蒋兆汝; 罗任; 张杰; 伍智敏; 吴云; 张扬; 邱振宇 ; 钛合金表面处理方法, , ZL202110415352.3
[2] 刘春轩,邱敬文,蒋兆汝,吴云等,铁铝合金复合强化铝基材料、其制备方法及应用,ZL202011374650.4
[3] 刘军,张伟,邱敬文,潘迪,张明阳;一种汽车制动系统用粉末冶金钛基复合材料及其制备方法,专利号:201810524644.9
[4] 张伟;刘军;邱敬文;潘迪,一种高性能制动系统用轻量化的钛材合头及其制备方法,专利号:CN201811407244
[5] 刘咏,刘延彬,汤慧萍,邱敬文,王斌,王玉林;一种含稀土氧化物强化相钛合金的粉末冶金制备方法,专利号:200910308457.8
八、育人成效
[1] 指导地方高校国家级大学生创新创业训练计划项目:放电等离子烧结制备超细晶复合层状纯钛结构材料(201710534013)
[2] 全国大学生金相技能大赛 三等奖(第一指导教师)二等奖(第二指导教师)2017年
[3] 校级优秀本科毕业论文 表面机械强化钛合金摩擦磨损行为研究 2017年